Use WinRAR or 7-Zip to extract the downloaded .rar archive. You should see a file named SI6M_56_E.bin (or similar).
Format a USB drive (8GB or smaller recommended) to FAT32 . Use WinRAR or 7-Zip to extract the downloaded
The indicator light (LED) should start blinking rapidly, signaling the update is in progress. Use WinRAR or 7-Zip to extract the downloaded
This is a "General" firmware, meaning it usually supports standard remote controls. If your remote doesn't work after flashing, you may need to use the physical buttons on the TV to access the menu and adjust settings. Use WinRAR or 7-Zip to extract the downloaded
Do not turn off the power while the LED is blinking, as this can "brick" the board.
.rar (Requires extraction to get the .bin file) Update Method: USB Interface How to Install the Firmware