: Configure the firmware (via the Factory Menu, usually accessed by pressing Input + 2580 or Menu + 1147 on the remote) to "Power On" to the USB source automatically.
is a 17.0-inch SXGA panel with a resolution of and uses a 2-channel, 8-bit LVDS interface. Download and Flashing Guide Download V56C PA673 Panel M170EN04 USB rar
Extract the .rar file and copy the .bin firmware file (often named bin_v56.bin ) to the of the drive. Flash the Board : : Configure the firmware (via the Factory Menu,
To set up your board with the panel, you must flash the correct resolution firmware via USB. The Flash the Board : To set up your
Turn on the power. The LED indicator will blink rapidly during the flashing process.
firmware specifically for resolution. Packages are typically labeled by resolution rather than specific panel model. Prepare the USB Drive : Format a USB flash drive to FAT32 .