Make sure your X-coordinates go slightly past the center point (e.g., X -0.05) to ensure the part actually drops off without leaving a "stub." 6. Verify and Post Never send code to the machine without checking it first.
In the parameters, ensure you have a "Lead In" and "Lead Out" so the tool doesn't just plunge straight down into the material. 4. Roughing and Finishing This is where the shape happens. Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)
In this tutorial, we’re going to walk through the essential workflow for programming a basic turned part in Mastercam 2017. 1. Preparing the Workspace Make sure your X-coordinates go slightly past the