Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:
Use the software’s drag-and-drop interface to create ladder diagrams.
features a built-in web server. Once configured, you can access a custom control panel by typing the PLC's IP address into a web browser. nano10.rar
Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation
Most TRi PLC software is Java-based. Ensure you have a compatible Java Runtime Environment (JRE) installed on your PC. Your PC’s IP address must be in the same range (e
, you must establish a connection between your computer and the Connect the to your router or PC using a standard CAT5/CAT6 cable. Default IP Address: The defaults to 192.168.1.5 .
Select "New Project" and ensure the hardware type is set to . Basic Programming (i-TRiLOGI) Once the software is running
It supports Modbus protocol for integration with HMI or SCADA systems.