Pull the zipper tape toward you. It will "click" or slide onto the tape, joining the teeth. Remove: Pull the fully attached slider off the jig. 3. Secure the Zipper (Stopping) To prevent the zipper pull from sliding off the end:
inch of the plastic/metal teeth from one side of the tape to make inserting the pull easier. StyxHips 20 Clipszip
Sew over the teeth several times at the end to create a sturdy bar tack. Pull the zipper tape toward you
Ensure the other end of the tape teeth are aligned, but with one side slightly longer (by about 12one-half inch) to facilitate the zipper pull engagement. 2. Install the Slider (The "Zipper Jig" Method) Ensure the other end of the tape teeth
Using a Zipper Jig or "Zipper Helper" is the easiest way for bulk, according to tutorials.